Comments on MoBlog: Google Voice via SIP! (w/o Gizmo5)

hey i am able succcessfully reach at the point whe...

2011-04-21T21:24:37.725-07:00

hey i am able succcessfully reach at the point where i am able to call my x-lite softphone from regular phone.

i am not able to do step 3b and onwards because i cannot dial ***7469. this call does not go through.

i am facing the same problem GV lady calls but when i enter 2 digit code it does not accepts that. any help.

below are the steps i am not able to do.

3b - After install, launch X-Lite and dial "***7469" to open the config
3b1 - Enter "dtmf" for the filter and make sure "system:dtmf:force_send_in_phoneband" is set to "1"
3b2 - Enter "2833" for the filter and set "rtp:2833:enabled" to "0"

HEY, HI THANK YOU VERY MUCH FOR THE GUIDE. I COUL...

2010-09-17T16:56:50.062-07:00

HEY, HI THANK YOU VERY MUCH FOR THE GUIDE.

I COULD RECEIVE CALLS, I HAD TO VERIFY THROUGH X LITE THOUGH BEFORE I SET UP MY PAP2 ATA, BUT I COULDNT PLACE CALLS TO MY T-MOBILE NUMBER, WHEN DIAL USING X-LITE, ITS SAYS IS UNAVAILABLE, AND WHEN DIAL USING PAP2 I'D GET A BUSY SIGNAL, WHATS MISSING

Actually, never mind. I messed with the rfc settin...

2010-09-11T18:46:00.458-07:00

Actually, never mind. I messed with the rfc settings and then it just randomly worked.

Hey, first off great tutorial, but... GV isn't...

2010-09-11T12:36:38.802-07:00

Hey, first off great tutorial, but... GV isn't accepting my touch tone confirmation? They must have changed things, as this tutorial is about a year old.

Interestingly, my GV calls are still be routed, despite the number showing in my GV settings as not yet confirmed.

So basically, I'm not complaining but it would be nice to have everything working. I'm using this with my iPod Touch and Acrobit's new Groundwire. I appreciate any advice you can spare.

Thanks!

I am located out of US, I have already registered ...

2010-09-04T16:27:34.594-07:00

I am located out of US, I have already registered IPKall+TPad , and utilise the X-Lite 3.x (MacOS), but how to use GV account (I have added) so I can make any calls with my GV account?

Forgot to add you need to add your new voxalot inf...

2010-06-20T20:39:15.817-07:00

Forgot to add you need to add your new voxalot info to IPKall.

SIP Phone Number: Your Voxalot ID
SIP Proxy: us.voxalot.com

Found a new sip provider pbxes.org was not being r...

2010-06-20T19:46:14.295-07:00

Found a new sip provider pbxes.org was not being recognized by x-lite for some reason not sure what the deal is.

Anyway for anyone else who experiences this try Voxalot you will need an email other then gmail it wouldn't accept my gmail and you just choose a 6 digit number fill out the registration as usual don't need a referrer number I left that blank.

point X-lite at Voxalot just like you would pbxes.org. Member # is the username, voxalot password, proxy is us.voxalot.com.

Good Luck Lisa

I can't receive or make calls today I don'...

2010-06-20T14:53:49.350-07:00

I can't receive or make calls today I don't know what happened I checked all my setting with the softphone and IPKall, pBXes and GV the only one that was off was IPKall had my email adress as my SIP Proxy which I know I didn't change so I fixed that and updated it and still no calls work.

Any suggestions as what the problem might be?

2010-06-20T14:14:12.596-07:00

This comment has been removed by the author.

Thank you so much for this post! It's working ...

2010-06-19T19:38:16.726-07:00

Thank you so much for this post! It's working great for me!

Ben I could Kiss you it really works took me some ...

2010-06-18T18:37:14.674-07:00

Ben I could Kiss you it really works took me some time to make sure I got it right but I now have a working GV that I can place and receive calls from my PC.

Thank You So Much,
Lisa

Derek, The number that you're calling...

2010-06-18T11:51:44.033-07:00

Derek,
The number that you're calling is outside the GV Free area so those calls will cost you. I guess I should have specified that part.

William,
Unfortunately, this solution won't let you dial out for free from your SIP client (XLITE in this case). To place calls, you need to use the Google Voice interface and specify your SIP line as the number to connect to.

Gabe,
404 errors indicate that the page that was trying to load wasn't available on the server. It's likely that this is a temporary bug on PBXes.org

-Ben

Hey! ive got everything upto step 3. when i put my...

2010-06-17T10:24:23.243-07:00

Hey! ive got everything upto step 3. when i put my pBXes.org info into xlite all it says is "Registration Error: 404 - Not found"
Any ideas?

Hello, Thanks very much for the info! I have conf...

2010-06-15T15:29:44.272-07:00

Hello,

Thanks very much for the info! I have configured everything per your instructions. I have verified google voice and can receive calls.

I am unable to place calls though. When I dial, I get an operator saying "The person you are calling is unavailable, please try again" XLITE says Call Failed: Not Found.

I have tried calling several numbers. Any idea what
I am doing wrong?

Excellent tutorial thanks. Have everything working...

2010-06-12T04:17:11.244-07:00

Excellent tutorial thanks. Have everything working now except that Google Voice is telling me I don't have enough credit to pay for the call (based in Spain, calling a UK number) indicating that somewhere is not allowing free international calls. Am I being too optimistic or am I missing something?

I had this problem too when I first tried to set i...

2010-05-28T07:13:07.121-07:00

I had this problem too when I first tried to set it up. What ended up solving it for me was experimenting with different DTMF settings in the SIP client (steps 1b6 & 3b*).

If you have these settings and it still isn't working, try changing them one at a time until you find a combination that works.

-Ben

Thank you very much for the tutorial. I have compl...

2010-05-28T06:15:04.442-07:00

Thank you very much for the tutorial. I have completed the setup (GV, Pbxes and IPKall) and have a SIP (X-Lite) client recognize the set-up.

However, I am unable to verify the GV verification code using X-Lite (step 4c in your tutorial). I have tried with few other SIP clients as well, but none of them is able to accept the verification code. Could you please help?

Thanks,
--John

thanks for the tutorial i followed it's step b...

2010-03-20T04:34:46.921-07:00

thanks for the tutorial i followed it's step by step but still i cant dial out.are there things that i may have left out?everytime i dial it says the person ur calling is unavailable.outbound call failed error.

@LeeFamily, does your SIPDroid work with SIPGate? ...

2010-02-01T16:24:19.958-08:00

@LeeFamily, does your SIPDroid work with SIPGate? I have everything configured and can make calls, however, the receiver cannot hear me.

I configured SIPDroid with my SIPGate settings and make calls using Google Voice over WiFi. I can make a call and it connects to the wireless provider and I can hear the other person however, they can't hear me. Do you have this problem?

dude..thank u so very much...thanks a lot..the tut...

2010-01-28T10:31:13.039-08:00

dude..thank u so very much...thanks a lot..the tutorial was awesome..I finally created an account thank u again...n keep helping

Just an FYI, sipgate.com is offering free incoming...

2010-01-07T07:36:24.817-08:00

Just an FYI, sipgate.com is offering free incoming USA phone numbers. They are an SIP provider and they allow free incoming calls. They only charge for outgoing. It's the same thing as Gizmo, and if you use it in conjunction with Google Voice call-back for outgoing calls, it will be completely free just like Gizmo. I set it up yesterday and it works seamlessly.

-David

Hi Mike, Try http://www.num2sip.com/ - i...

2009-12-29T21:51:59.070-08:00

Hi Mike,

Try http://www.num2sip.com/ - it should accomplish the same step in the process. You can also track down other options here:

http://www.voip-info.org/wiki/view/DID+Service+Providers

-Ben

Ben, Great tutorial. It seems that IPKall.com is...

2009-12-29T17:54:56.005-08:00

Ben,

Great tutorial. It seems that IPKall.com isn't giving out numbers anymore. Do you know of an alternative service?

Mike